© Copyright Lenovo 2017
Table 306.
MLD Interface Configuration Commands (continued)
Command Syntax and Usage
ipv6 mld robust <1‐10>
Configures the MLD Robustness variable, which allows you to tune the switch
for expected packet loss on the subnet. If the subnet is expected to be lossy
(high rate of packet loss), increase the value.
The default value is 2.
Command mode: Interface IP
no ipv6 mld robust
Resets the MLD Robustness variable to its default value of 2.
Command mode: Interface IP
ipv6 mld version <1‐2>
Defines the MLD protocol version number.
The default value is 1.
Command mode: Interface IP
no ipv6 mld version
Resets the MLD protocol version number to its default value of 1.
Command mode: Interface IP
ipv6 mld default
Resets MLD parameters for the selected interface to their default values.
Command mode: Interface IP
Chapter 4: Configuration Commands
575