Appendix A. Enterprise Nos System Log Messages - Lenovo RackSwitch G8264 Command Reference Manual

Appendix A. Enterprise NOS System Log Messages

© Copyright Lenovo 2017
The RackSwitch G8264 uses the following syntax when outputting system log
(syslog) messages:
<Time stamp> <IP/Hostname> <Log Label> <Thread ID>:<Message>
The following parameters are used:
 <Timestamp>
The time of the message event is displayed in the following format:
<month (3 characters)> <day> <hour (1‐24)>:<minute>:<second>
For example: Aug 19 14:20:30
 <IP/Hostname>
The hostname is displayed when configured.
For example: 1.1.1.1
 <Log Label>
The following types of log messages are recorded: LOG_CRIT, LOG_WARNING,
LOG_ALERT, LOG_ERR, LOG_NOTICE and LOG_INFO.
 <Thread ID>
This is the software thread that reports the log message.
For example:
stg, ip, console, telnet, vrrp, system, web server, ssh, bgp
 <Message>: The log message
Following is a list of potential syslog messages. To keep this list as short as
possible, only the <Thread ID> and <Message> are shown. The messages are sorted
by <Log Label>.
Where the <Thread ID> is listed as mgmt, one of the following may be shown:
console, telnet, web server or ssh.
745