Link Aggregation Control Protocol Information
© Copyright Lenovo 2017
Use these commands to display LACP status information about each port on the
G8264
.
Table 24.
LACP Information Options
Command Syntax and Usage
show lacp
Displays the current LCAP configuration.
Command mode: All
show lacp aggregator <aggregator ID>
Displays detailed information about the LACP aggregator.
Command mode: All
show lacp information
Displays a summary of LACP information. For details, see page
Command mode: All
show lacp information state {down|off|up}
Displays a summary of LACP information for the interfaces that are down, off
or up.
Command mode: All
show interface port <port alias or number> lacp [information]
Displays LACP information about the selected port.
Command mode: All
64.
Chapter 2: Information Commands
63