Access Control Configuration
424
G8264 Command Reference for ENOS 8.4
Use these commands to create Access Control Lists. ACLs define matching criteria
used for IP filtering and Quality of Service functions.
For information about assigning ACLs to ports, see "Port ACL Configuration" on
page
411.
Table 196.
General ACL Configuration Options
Command Syntax and Usage
accesscontrol group <1‐256>
Configures an ACL Group. To view command options, see page
Command mode: Global configuration
accesscontrol list <1‐256>
Configures an Access Control List. To view command options, see page
Command mode: Global configuration
accesscontrol list6 <1‐128>
Configures an IPv6 Access Control List. To view command options, see
page
435.
Command mode: Global configuration
accesscontrol macl <1‐128>
Configures an Access Control List. To view command options, see page
Command mode: Global configuration
accesscontrol vmap <1‐128>
Configures an ACL VLAN map. To view command options, see page
Command mode: Global configuration
show accesscontrol
Displays the current ACL parameters.
Command mode: All
443.
425.
444.
448.