TCP/UDP Filtering Configuration
© Copyright Lenovo 2017
Table 200.
IP version 4 Filtering Configuration Options
Command Syntax and Usage
no accesscontrol list <1‐256> ipv4 typeofservice
Deletes the configured Type of Service (ToS) value for the specified ACL.
Command mode: Global configuration
default accesscontrol list <1‐256> ipv4
Resets the IPv4 parameters for the ACL to their default values.
Command mode: Global configuration
show accesscontrol list <1‐256> ipv4
Displays the current IPv4 parameters.
Command mode: All
These commands allow you to define TCP/UDP matching criteria for an ACL.
Table 201.
TCP/UDP Filtering Configuration Options
Command Syntax and Usage
accesscontrol list <1‐256> tcpudp sourceport
<1‐65535> [<mask (0xFFFF)>]
Defines a source port for the ACL. If defined, traffic with the specified TCP or
UDP source port will match this ACL. Specify the port number. Listed here are
some of the well‐known ports:
Number
Name
20
ftpdata
21
ftp
22
ssh
23
telnet
25
smtp
37
time
42
name
43
whois
53
domain
69
tftp
70
gopher
79
finger
80
http
Command mode: Global configuration
no accesscontrol list <1‐256> tcpudp sourceport
Disables the configured source port for the specified ACL.
Command mode: Global configuration
Chapter 4: Configuration Commands
429