© Copyright Lenovo 2017
Table 375.
OpenFlow Configuration Options (continued)
Command Syntax and Usage
mirrortocontroller cookie <0x0‐0xffffffffffffffff>
Sets the flow cookie for packets sent to controller as a result of a
mirror‐to‐controller setting (flow is set to output the packet to a controller in
addition to another destination).
The default value is 0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no mirrortocontroller cookie
Resets the mirror‐to‐controller flow cookie to the default value of
0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
sendtocontroller cookie <0x0‐0xffffffffffffffff>
Sets the flow cookie for packets sent to controller as a result of a
send‐to‐controller setting (flow is set to output the packet only to a controller).
The default value is 0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no sendtocontroller cookie
Resets the send‐to‐controller flow cookie to the default value of
0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
statictable
Configures static flows. For command options, see page
Command mode: OpenFlow Instance
tablemiss cookie <0x0‐0xffffffffffffffff>
Sets the flow cookie for packets sent to controller as a result of a table‐miss
setting (send input packets that don't match any flow entries to controller).
The default value is 0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no tablemiss cookie
Resets the table‐miss flow cookie to the default value of
0xffffffffffffffff.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
666.
Chapter 4: Configuration Commands
663