Stacking Information
© Copyright Lenovo 2017
The following commands list the Stacking information options.
Note: The following commands are available only in stacking.
Table 19.
Stacking Information Options
Command Syntax and Usage
show interface link state detached
Displays link information for all detached ports.
Command mode: All
show interface link type {external|nonstacking|stacking}
Displays link information for all ports that match one of the following options:
external displays link information for external ports only
mgmt displays link information for management ports only
nonmgmt displays link information for non‐management ports only
nonstacking displays link information for non‐stacking ports only
qsfp displays link information for QSFP+ ports only
stacking displays link information for stacking ports only
Command mode: All
show interface link switch <configured switch number (1‐8)>
Displays link information for the specified configured switch.
Note: This command is available only on the master switch.
Command mode: All
show interface link switch <configured switch number (1‐8)> state
{detached|disabled|down|errdisabled|up}
Displays link information for all the ports of the specified configured switch
that match one of the following options:
detached displays link information for detached ports only
disabled displays link information for disabled ports only
down displays link information only for ports in link down port state
errdisabled displays link information for error disabled ports only
up displays link information only for ports in link up port state
Note: This command is available only on the master switch.
Command mode: All
Chapter 2: Information Commands
51