Chapter 6. Boot Options - Lenovo RackSwitch G8264 Command Reference Manual

Iscli - industry standard cli for lenovo enterprise network operating system 8.4

Hide thumbs Also See for RackSwitch G8264:

Table of Contents

Chapter 6. Boot Options

To use the Boot Options commands, you must be logged in to the switch as the

administrator. The Boot Options commands provide options for:

Selecting a switch software image to be used when the switch on the next reboot

Selecting a configuration block to be used when the switch on the next reboot

Downloading or uploading a new software image to the switch via

SFTP/FTP/TFTP

In addition to the Boot commands, you can use a Web browser or SNMP to work

with switch image and configuration files. To use SNMP, refer to "Working with

Switch Images and Configuration Files".

The boot options are discussed in the following sections.