Link Aggregation Group (LAG) Hash Configuration
© Copyright Lenovo 2017
Use the following commands to configure Link Aggregation Group (LAG) hash
settings for the G8264. The LAG hash settings affect both static LAGs and LACP
LAGs.
To achieve the most even traffic distribution, select options that exhibit a wide
range of values for your particular network. You may use the configuration
settings listed in Table 241 combined with the hash parameters listed in Table
and Table
243.
Table 241.
LAG Hash Options
Command Syntax and Usage
[no] portchannel thash fcoe cntagid
Enables or disables FCoE LAG hashing on the cntag id.
Command mode: Global configuration
[no] portchannel thash fcoe destinationid
Enables or disables FCoE LAG hashing on the destination id.
Command mode: Global configuration
[no] portchannel thash fcoe fabricid
Enables or disables FCoE LAG hashing on the fabric id.
Command mode: Global configuration
[no] portchannel thash fcoe originatorid
Enables or disables FCoE LAG hashing on the originator id.
Command mode: Global configuration
[no] portchannel thash fcoe responderid
Enables or disables FCoE LAG hashing on the responder id.
Command mode: Global configuration
[no] portchannel thash fcoe sourceid
Enables or disables FCoE LAG hashing on the source id.
Command mode: Global configuration
[no] portchannel thash ingress
Enables or disables LAG hash computation based on the ingress port.
The default setting is disabled.
Command mode: Global configuration
[no] portchannel thash L4port
Enables or disables use of Layer 4 service ports (TCP, UDP and so on) to
compute the hash value.
The default setting is disabled.
Command mode: Global configuration
Chapter 4: Configuration Commands
242
483