Show All Fdb Information; Clearing Entries From The Forwarding Database - Lenovo RackSwitch G8264 Command Reference Manual

Show All FDB Information

Clearing Entries from the Forwarding Database

62
G8264 Command Reference for ENOS 8.4
The following command displays Forwarding Database information:
show mac­address­table
Command mode: All
Mac address Aging Time: 300
MAC address VLAN Port Trnk State Permanent
­­­­­­­­­­­­­­­­­ ­­­­ ­­­­ ­­­­ ­­­­­ ­­­­­­­­­
00:04:38:90:54:18 1 4 FWD
00:09:6b:9b:01:5f 1 13 FWD
00:09:6b:ca:26:ef 4095 1 FWD
00:0f:06:ec:3b:00 4095 1 FWD
00:11:43:c4:79:83 1 4 FWD P
An address that is in the forwarding (FWD) state, means that it has been learned by
the switch. When in the aggregation (TRK) state, the port field represents the Link
Aggregation Group (LAG) number. If the state for the port is listed as unknown
(UNK), the MAC address has not yet been learned by the switch, but has only been
seen as a destination address.
When an address is in the unknown state, no outbound port is indicated, although
ports which reference the address as a destination are listed under "Reference
ports."
To clear the entire FDB, refer to "Forwarding Database Maintenance" on page 725.