Lenovo RackSwitch G8264 Command Reference Manual page 761

© Copyright Lenovo 2017
Thread LOG_NOTICE Message (continued)
MGMT enable password changed
MGMT Error in setting the new config
MGMT Failed login attempt via {BBI|TELNET} from host <IP address>.
MGMT Failed login attempt via the CONSOLE
MGMT FLASH Dump cleared from BBI
MGMT Log msg no. <x>
MGMT Membership for Port <port> in vlan <VLAN> is not effective while
the port is assigned with PVID <PVID> by 802.1x
MGMT MGT Gateway <IP address> not in the same subnet as the Mgt IP
<IP address>/<netmask>
MGMT New config set
MGMT new configuration saved from ISCLI
MGMT New Management IP Address <IP address> configured
MGMT packet‐buffer statistics cleared
MGMT PANIC command from CLI
MGMT Password for {oper|operator} changed by {SNMP user|
<username>}, notifying admin to save.
MGMT Port <port> remains untagged while it is assigned PVID <PVID> by
802.1x
MGMT QSFP: Port <port> changed to {10G|40G}, from {BBI|SNMP|CLI}.
MGMT RADIUS server timeouts
MGMT RADIUS: authentication timeout. Retrying...
MGMT RADIUS: failed to contact {primary|secondary} server
MGMT RADIUS: No configured RADIUS server
MGMT RADIUS: trying alternate server...
MGMT scp<username>(<user type>) {logout|ejected|idle timeout|
connection closed} from {Console|Telnet/SSH}
MGMT scp<username>(<user type>) login {on Console|from host
<IP address>}
MGMT second syslog host changed to {this host|<IP address>}
MGMT selectable [boot] mode changed
MGMT STP BPDU statistics cleared
MGMT switch reset from CLI
Appendix A: Enterprise NOS System Log Messages
761