Static FDB Configuration
© Copyright Lenovo 2017
Table 234.
Static Multicast MAC Configuration Options
Command Syntax and Usage
no macaddresstable multicast all [interface port
<port number or alias>|mac <MAC address>|vlan <VLAN ID (1‐4094)>]
Deletes all static multicast entries.
interface port deletes all static multicast entries that use the specified
port
mac deletes all static multicast entries that use the specified MAC address
vlan deletes all static multicast entries that use the specified vlan
Command mode: Global configuration
show macaddresstable multicast
Display the current static multicast entries.
Command mode: All
Use the following commands to configure static entries in the Forwarding
Database (FDB).
Table 235.
FDB Configuration Options
Command Syntax and Usage
[no] macaddresstable static <MAC address> port
<port alias or number>
Adds or removes a permanent FDB entry. Enter the MAC address using the
following format: xx:xx:xx:xx:xx:xx.
For example, 08:00:20:12:34:56.
You can also enter the MAC address as follows: xxxxxxxxxxxx.
For example, 080020123456.
Command mode: Global configuration
macaddresstable static <MAC address> vlan <VLAN ID (1‐4094)>
{port <port alias or number>|portchannel <1‐64>|adminkey <1‐65535>}
Adds a permanent FDB entry. Enter the MAC address using the following
format: xx:xx:xx:xx:xx:xx.
For example, 08:00:20:12:34:56.
You can also enter the MAC address as follows: xxxxxxxxxxxx.
For example, 080020123456.
Command mode: Global configuration
no macaddresstable static <MAC address> <VLAN ID (1‐4094)>
Deletes permanent FDB entries.
Command mode: Global configuration
Chapter 4: Configuration Commands
475