Area Index Configuration
© Copyright Lenovo 2017
Table 280.
OSPF Configuration Options (continued)
Command Syntax and Usage
messagedigestkey <key ID (1‐255)> md5key <text string>
Assigns a string to MD5 authentication key.
Command mode: Router OSPF
no messagedigestkey <key ID (1‐255)>
Removes the MD5 authentication key.
Command mode: Router OSPF
redistribute {fixed|static|rip|ebgp|ibgp}
Configures OSPF route redistribution. See page
Command mode: Router OSPF
show ip ospf
Displays the current OSPF configuration settings.
Command mode: All
The following table describes the Area Index commands.
Table 281.
Area Index Configuration Options
Command Syntax and Usage
area <0‐19> areaid <IP address>
Defines the IP address of the OSPF area number.
Command mode: Router OSPF
area <0‐19> authenticationtype {password|md5}
Sets the authentication type.
password authenticates simple passwords so that only trusted routing
devices can participate.
md5 is used when MD5 cryptographic authentication is required.
Command mode: Router OSPF
no area <0‐19> authenticationtype
Removes the authentification type.
Command mode: Router OSPF
[no] area <0‐19> enable
Enables or disables the OSPF area.
Command mode: Router OSPF
543 to view command options.
Chapter 4: Configuration Commands
535