WRED Transmit Queue Configuration
© Copyright Lenovo 2017
The following table describes the WRED Transmit Queue commands.
Table 195.
WRED Transmit Queue Options
Command Syntax and Usage
[no] qos randomdetect transmitqueue <0‐7> enable
Enables or disables the WRED transmit queue configuration.
Command mode: Global configuration
qos randomdetect transmitqueue <0‐7> nontcp
minthreshold <min. threshold (1‐100)> maxthreshold
<max. threshold (1‐100)> droprate <drop rate (1‐100)>
Configures the WRED thresholds for non‐TCP traffic.
Command mode: Global configuration
qos randomdetect transmitqueue <0‐7> tcp
minthreshold <min. threshold (1‐100)> maxthreshold
<max. threshold (1‐100)> droprate <drop rate (1‐100)>
Configures the WRED thresholds for TCP traffic.
Command mode: Global configuration
no qos randomdetect transmitqueue <0‐7> {nontcp|tcp}
Deletes the WRED configuration for non‐TCP or TCP traffic.
Command mode: Global configuration
Chapter 4: Configuration Commands
423