Ospfv3 Host Entry Configuration - Lenovo RackSwitch G8264 Command Reference Manual

OSPFv3 Host Entry Configuration

558
G8264 Command Reference for ENOS 8.4
Table 295.
Layer 3 IPsec Configuration Options (continued)
Command Syntax and Usage
no area­virtual­link <1‐3> encryption ipsec spi <256‐4294967295>
Disables the specified Encapsulating Security Payload (ESP) SPI.
Command mode: Router OSPF3
area­virtual­link <1‐3> encryption ipsec default
Resets the IPsec encryption configuration to its default values.
Command mode: Router OSPF3
show ipv6 ospf area­virtual­link
Displays the current OSPFv3 virtual link settings.
Command mode: All
The following table describes the OSPFv3 Host Entry commands.
Table 296.
OSPFv3 Host Entry Configuration Options
Command Syntax and Usage
host <1‐128> address <IPv6 address> <prefix length (1‐128)>
Configures the base IPv6 address and the subnet prefix length for the host
entry.
Command mode: Router OSPF3
host <1‐128> area <0‐2>
Configures the area index of the host.
Command mode: Router OSPF3
host <1‐128> cost <1‐65535>
Configures the cost value of the host.
Command mode: Router OSPF3
[no] host <1‐128> enable
Enables or disables the host entry.
Command mode: Router OSPF3
no host <1‐128>
Deletes the host entry.
Command mode: Router OSPF3
show ipv6 ospf host [<1‐128>]
Displays the current OSPFv3 host entries.
Command mode: All