Feature Data; Access Code Data Block (Table 6-L) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMINGPROCEDURES
SECTION 200-255-306
JANUARY1993
CHAPTER 6
FEATURE DATA
1. Access Code Data Block (Table 6-1)
1.01 The Access Code Data Block (DACD Pro-
gram) assigns the dial access codes for feature
execution. Data is entered as follows:
REQ (Request)--indicates that the program has
loaded. Since data is always present, only the
CHG response is possible.
FTR (Feature)-
Enter: The 3- or 4-character feature abbrevia-
tion (see Table 6-1 a), a space, and then
the desired 1 - 3 digit access code. (See
Table 6-1 a for feature names and stan-
dard code assignments.)
NOTE:
Default access codes are shown in Table 6-
1a. Any fea ture that does not require a change,
does notneed to be entered. Features maybe
entered in any order.
TABLE 6-1
Procedure
- Access Code Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM
PROMPT
USER ENTRY
NOTE
OK
DACD
- DISK LOADING -
REQ
CHG
Feature?
FTR
Feature + [space] + 1 - 3 digits
1
(continued)
NOTES:
1. a. In response to FTR, enter the feature abbreviation, followed by a space and its access code.
b. Features may be entered in any order, and any new access code will overwrite the existing one.
c. Any feature code which does not need to be changed, does not need to be entered.
d. The feature abbreviations and factory-assigned codes are listed in Table 6-la.
Ignore line entered.
Stop printing and return to REQ.
6-1