Special Common Carrier; Description; Programming; General - Toshiba Perfecptione Installation And Maintenance Manual

4)
local call route table (LCR).
Long distance directory assistance (555): This
is a call using any area code (or no area code)
plus 5551212. If allowed, this type of call is
routed via the LDI route table, as indicated in the
PAR table, or via the route table (DAC = N) to
which this area code is assigned.
NOTE:
When a DDD callis dialed,
needed before the area
cause the local operator to be connected.
4. SPECIAL COMMON CARRIER
4.00 Description
4.01 Dialing extra digits to access the Special
Common Carrier (SPCC) trunks is not necessary if
the LCR feature has been activated. The selection
of SPCC trunks (like all other trunks) and the
outpulsing of the extra digits (access code, authori-
zation code, etc.), is accomplished automatically
by the PERCEPTIONeLex LCR feature. This func-
PERCEPTION,&,
LCR/TR PROGRAMMING GUIDE
MARCH 1991
tion is completely transparent to the station user.
5. PROGRAMMING
5.00 General
5.01 Customer data programming can be done in
many different ways with the same results. The
starting point and the particular order may differ
according to personal preferences. As an example,
one logical sequence for programming customer
data is shown in the Customer Data Programming
Flowchart.
5.02 For detailed information,
see Programming
Procedures,
Section 200-255-300, in the
PERCEPTIONekex Insfaallation and Maintenance
manual, and the Logic paragraph in this LCR/TR
programming guide (Paragraph 7).
-3-