Print Least Cost Routing Data Block (Table 12-7) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMINGPROCEDURES
SECTION 200-255-312
FEBRUARY1992
4. Print Least Cost Routing Data Block (Table
12-7)
4.01 To use the Print Least Cost Routing Data
Block
(PLCR Program).
l
Perform Authorization Procedure (Level 1,2, or
3).
Enter: PLCR (in response to the OK prompt).
l
When the REQ prompt is received after the
program is loaded, enter one of the following
commands:
LCRALL-Ail Least Cost Routing Data Blocks will
be output.
PAR-Miscellaneous Parameters Table will be
output.
AOCNOXX-Area/Office Code Table XX will be
.
output.
AOCRNXX-All Area/Office Code Tables that point
to Route Number (RN) XX will be output.
CODXXX-All Area/Office Code Tables relating to
Area Code XXX will be output.
RTALL-All
Route Tables will be output.
RTXX-Route Table XX will be output.
TGPXX-All Route Tables using Trunk Group XX
will be output.
RTMDXX-All Route Tables using Modify Digits
Table XX will be output.
ACTALL-All Area Code Tables will be output.
MDTXX-Modify Digits Table XX will be output.
ACTRNXX-All Area Code Tables that point to
Route Number (RN) XX will be output.
AOCALL-All Area/Office Code Tables will be
output.
12-12