Data Block (Table 13-4) - Toshiba Perfecptione Installation And Maintenance Manual

4. Print Message Registration Data Block(Table
13-4)
4.01 To use the Message Registration Data Block
(PMRD Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
Enter: PMRD (in response to the OK prompt).
l
When an REQ prompt is received after the pro-
gram is loaded:
Enter: One of the following commands:
MRDALL-Ail Message Registration Data will be
output. There may be a delay in the output after
the OCA prompt.
PROGRAMMINGPROCEDURES
SECTION 200-255-313
FEBRUARY1992
MRDPAR-The system will output a partial list of
the Message Registration Data Block (ICC, DDP,
HAC, and S/T).
RTNPAR-The system will output a partial list of
the Message Registration Data Block (FBI, FBU,
IBI, IBU, and CST for Rate Tables 1 - 5).
RTNALL-The system will output all the data from
the Rate Tables 1 - 5 (FBI, FBU, IBI, IBU, CST,
and OCA). There may be a delay in the output
after the OCA prompt.
TABLE.13-4
Procedure - Print Message Registration Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM PROMPT
OK
PMRD
USER ENTRY NOTE
- DISK LOADING -
REQ
1
- EXECUTE -
I I
=Q
I 1. I
NOTES:
1. The following responses are possible:
MRDALL =-
MRDPAR =
RTNPAR =
RTNALL =
Outputs all Message Registration Data. There may be a delay in the output after the
OCA prompt.
Outputs a partial list of the Message Registration Data Block (ICC, DDP, HAC, and
SW,).
Outputs a partiallist of the Message Registration Data Block(FBI, FBU, IBI, IBU, and
CST for Rate Tables 1 - 5).
Outputs all the data from Rate Tables 1 - 5 (FBI, FBLJ, IBI, IBU, CST, and OCA).
There may be a delay in the output after the OCA prompt.
Ignore line entered.
Backspace.
Stop printing and return to REQ.
Exit program.
13-7