Print Digital Data Interface Unit Data Block (Table 1 L-2) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMING PROCEDURES
SECTION 200-255-311
FEBRUARY 1992
2. Print Digital Data Interface Unit Data Block
l
When a REQ prompt is received after the pro-
I
(Table 1 l-2) gram is loaded:
Enter: PORALL.
2.01 To use the Print Digital Data Interface Unit
Data Block
(PDIU Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
l
All DDIU Data Blocks will be output in numerical
order of ports (lowest first).
Enter: PDIU (in response to the OK prompt).
TABLE 11-2
Procedure - Print Digital Data InterfaceUnit Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM
PROMPT
USER ENTRY
NOTE
OK
PDIU
- DISK LOADING -
I
REQ
1
- EXECUTE -
REQ
1
NOTES:
7. The only response possible is:
PORALL = Outputs all DDIU Data Blocks in numerical order of ports (lowest first).
2.
a
= Ignore line entered.
= Backspace.
= Stop printing and return to REQ.
m = Exit program.
11-6