Print Class Of Service Data Block (Table 6-4) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMINGPROCEDURES
SECTION 200-255-306
FEBRUARY1992
4. Print Class of Service Data Block (Table 6-4)
4.01 To use the Print Class of Service Data Block
(PCOS Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
Enter: PCOS (in response to the OK prompt).
l
When an REQ prompt is received after the
program is loaded:
Enter: PRT.
l
The COS Data Block will print out in the following
format (see Table 6-3a for an explanation of
feature codes):
COS NO.
COSO AAA BBB CCC DDD EEE FFF GGG
HHH ill JJJ KKK LLL
COS 1 (etc., up to 15)
REQ (This prompt will be given at the end of
printout.)
Enter: w m 19 (to exit program).
TABLE 6-4
Procedure - Print Class of Service Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM
PROMPT
OK
PCOS
USER ENTRY NOTE
- DISK LOADING -
=Q
PRT
- EXECUTE -
=Q
NOTES:
is: PRT = Outputs Class of Service Data Block.
= Stop printing and return to REQ.
6-10