Table of Contents
Advertisement
PROGRAMMINGPROCEDURES
SECTION 200-255-311
FEBRUARY1992
TABLEli-1
Procedure - Digital Data Interface Unit Data Block
Authorization
Procedure
must be completed.
If an OK response
is received,
proceed
as follows:
ITEM
PROMPT
OK
DDIU
- DISK LOADING -
USER ENTRY
NOTE
Port Number
REQ
NEW, CHG, OUT
POR
LNNX
DIU Style
I
PDIU
I
Y or N
AT Commands
ATC
Y or N
Type of DDIU/PDIlJ
TYP
DIUl or DIU2
Directotv Number
DN
1 - 4 diaits
Hunt Directory Number
I
HNT
I
1 - 4 digits or NONE
Class of Service Group
cos
o- 15
Groups of DDlUs
GOD
o- 15
Tenant Nbmber
TEN
0 or 1
Button Assignment
KEY
0 - 9 [space] FEATURE
1,2,&3
4
5
6
7&8
78x9
10
11
12
13 & 14
NOTES:
(continued)
7.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
NN = PC5 location.
X = Circuit number.
Ports LNNl
- 4 on a NMDU PC5 can be used if they are not assigned in the DMDM Program.
Select the DIU style, DDIU or PDIU (0.04 software).
Y = PDIU, N = DDIU.
Ethos AT commands;
Y = Echo on, N = Echo off (Modem = N).
D/U7 = DDIU-MA/PD/U-DS.
D/U2 = DDIU-MAT/PD/U-DI.
This prompt will only appear when DIU2 (DDIU-MAT/PDIU-DI)
is entered after the TYP prompt.
This directory number will appear on an electronic/digital
telephone.
Enter the number to which this DN hunts. NONE = No hunt.
There are 16 different COS groups (which are defined in the COS Data Block).
Assign this DDIWPDIU
to one of 76 possible groups. Dial access into a group can be denied by Class of
Service.
The TEN entry for a DDIU-MAT/PDIU-DI
should be the same as the TEN entry for the etectronic/digital
telephone to which it is assigned.
Enter the button number, followed by a space and then the feature entry. Button 0 must be the station's
primary DN. See Table 1 I- la for possible entries.
PDIU-DS requires a DN assignment
to Key 0.
= Ignore line entered.
=
Backspace.
=
Stop printing and return to REQ.
=
Exit program.
11-3
Advertisement
Chapters
Table of Contents
