Resuming Sector Erase Of Flash Memory - Fujitsu 8FX Hardware Manual

MB95630H Series
26.5.6

Resuming Sector Erase of Flash Memory

This section explains the procedure for entering the sector erase resume
command to resume suspended erasing of a sector in the Flash memory.
■ Resuming Sector Erase of Flash Memory
• To resume suspended sector erase, send the sector erase resume command mentioned in the
command sequence table from the CPU to the Flash memory.
• The sector erase resume command resumes a sector erase operation suspended by the sector
erase suspend command. The sector erase resume command is executed by writing erase
resume code (0x30). Specify an address in the sector selected to be erased.
• A sector erase resume command input during sector erase is ignored.
MN702-00009-2v0-E
CHAPTER 26 DUAL OPERATION FLASH MEMORY
FUJITSU SEMICONDUCTOR LIMITED
26.5 Programming/Erasing Flash Memory
557