Hitachi SH7750 Hardware Manual page 869

Item
Output All output
voltage pins
Pull-up All pull-up
resistance resistance
Pin All pins
capacitance
Notes: 1. Connect V
GND, regardless of whether or not the PLL circuits and RTC are used.
2. The current dissipation values are for V
output pins unloaded.
3. I is the sum of the V
DDQ
*1 RCR2.RTCEN must be set to 1 to reduce the leak current in the standby mode. (There
is no need to input a clock from EXTAL2.)
*2 RTCON refers to the status in which RCR2.RTCEN is set to 1 and a clock is being input
to EXTAL2.
Symbol
V
OH
V
OL
R
pull
C
L
, V , and V
DD-PLL1/2 DD-RTC DD-CPG
, V
DDQ DD-RTC
Min Typ Max
2.4 — —
— — 0.55
20 60 180
— — 10
to V , and connect V
DDQ
min = V – 0.5 V and V
IH DDQ
, and V 3.3 V system currents.
DD-CPG
Unit Test Conditions
V
kΩ
pF
, V , and V
SS-CPG SS-PLL1/2
max = 0.5 V with all
IL
Rev. 6.0, 07/02, page 819 of 986
to
SS-RTC