Kenwood NX-5000 Series Function Reference page 105

1 DMR CONVENTIONAL SYSTEM
1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)
(Example) Behavior of Manual Site Hunt
This is an example of the behavior of Manual Site Hunt on the Revert Channel (Channel 2) when the Manual Site Hunt
key is pressed. Assuming that the channels registered to the transceiver are Channel 1 to Channel 4.
Press the Manual Site Hunt key
Channel 2
Moves to Channel 3
Wakeup Message is sent out once
The transceiver cannot detect the synchronization signal even if the Sync Wakeup Wait Time
Channel 3
elapses, or the transceiver can detect the synchronization signal but it is not equal to or higher
than the RSSI level set by Standard Site Roaming Level.
Moves to Channel 4
Wakeup Message is sent out once
The transceiver cannot detect the synchronization signal even if the Sync Wakeup Wait Time
Channel 4
elapses, or the transceiver can detect the synchronization signal but it is not equal to or higher
than the RSSI level set by Standard Site Roaming Level.
Moves to Channel 1
Wakeup Message is sent out once
The transceiver cannot detect the synchronization signal even if the Sync Wakeup Wait Time
Channel 1
elapses, or the transceiver can detect the synchronization signal but it is not equal to or higher
than the RSSI level set by Standard Site Roaming Level.
Moves to Channel 2
Wakeup Message is sent out once
The transceiver cannot detect the synchronization signal even if the Sync Wakeup Wait Time
elapses, or the transceiver can detect the synchronization signal but it is not equal to or higher
Channel 2
than the RSSI level set by Standard Site Roaming Level.
Call Fail Tone (2 beeps) is emitted from the speaker and "Out of Range" appears on the display
for 1 second
DMR FUNC (K, F)/Ver 2.20
CONTENTS INDEX
88