Kenwood NX-5000 Series Function Reference page 15

Revision History
Revision History
Date
1) Changed the version information in "About This Manual".
2) Added description on Optional Signaling LED in Table 1-1.
3) Added "Optional Signaling LED" in "1.1 Initiating Voice Communications (Basic Transmission and
Reception)".
4) Added description on In-call Busy Channel Lockout in "Avoiding Interference with Other
Communications (Busy Channel Lockout (DMR))".
5) Added supplementary notes on the behavior during data communication in "Communicating via a
Repeater (Repeater Mode)".
6) Added descriptions on the use of PC commands to the following:
Initiating an Individual Call
Initiating an Individual Call (Individual Call Acknowledge Request)
Initiating a Group Call
Initiating a Broadcast Call
1.10 Sending and Receiving a Status Message (Status Call)
Sending a Short Message
7) Added descriptions on Optional Signaling LED and Unit ID Serial Output in "Receiving an Individual
Call".
8) Added supplementary notes on Unit ID Serial Output in "Displaying the ID of the Communicating Caller
on the LCD (Caller ID Display)".
9) Added "Sending the Received Unit ID from the Communication Port (Unit ID Serial Output)" in "1.5
Making an Individual Call".
10) Added supplementary notes on In-call Busy Channel Lockout in "1.6 Initiating an Individual Call After
Ensuring That the Target Party Is Available for Communications (Individual Call Acknowledge
Request)".
2017.5.31
11) Added description on Optional Signaling LED in "Receiving an Individual Call (Individual Call
Acknowledge Request)".
12) Added descriptions on Optional Signaling LED and Unit ID Serial Output in "Receiving a Group Call".
13) Added descriptions on the behavior of the Selcall on PTT and Persistent Group ID (DMR) configurations
in "Group ID Scan (DMR)".
14) Added supplementary notes on the behavior during data communication in "Group ID Scan (DMR)".
15) Added "Avoiding Receiving a Group Call during an Incoming Individual Call (Ignore Group Call during
Individual Call)" to "1.7 Making a Group Call".
16) Added descriptions on Optional Signaling LED and Unit ID Serial Output in "Receiving a Broadcast
Group Call".
17) Deleted "The default configuration is normally used." from the descriptions on "Transmit Busy Wait
Time" and "Maximum ACK Wait Time".
18) Added description on the behavior for stopping the Alert Tone to the supplementary notes of "Receiving
a Status Message" (Transceiver Behavior).
19) Revised the description on the number of data that can be saved and deleted supplementary notes in
"Status Message Stack".
20) Added description on the maximum number of characters that can be sent and received in "1.11 Sending
and Receiving a Short Message (Short Data Call)". Added "DMR Message Communication
Configuration (DMR Message Type)".
21) Added description on the behavior for stopping the Alert Tone to the supplementary notes of "Receiving
a Short Message" (Transceiver Behavior).
22) Revised the description on the number of data that can be saved and added a table on the number of
data that can be saved to the supplementary notes in "Short Message Stack".
23) Added supplementary notes on the display when receiving an Individual Call in "1.12 Causing
Transceivers Other than the Transceiver of the Specified ID to Participate in a Conversation (Open
Voice Channel Mode)".
DMR FUNC (K, F)/Ver 2.20
Description
CONTENTS
xiv
INDEX