Kenwood NX-5000 Series Function Reference page 137

3 COMMUNICATION SECURITY
3.2 Configuring the Encryption Key Data Used for Communications
Operating the transceiver
1
Press and hold the
The transceiver enters Scrambler/Encryption Code Mode. The Multi-key
configured for a channel appears.
The following operations can also be used even if the transceiver enters
Scrambler/ Encryption Code Mode by pressing the Menu key or the
Scrambler/Encryption Code key.
Note
If Encryption is disabled, Encryption will be enabled when the transceiver
enters Scrambler/Encryption Code Mode. Even after the transceiver
exits from Scrambler/Encryption Code Mode, Encryption remains enabled.
2
Press the [ ] or [
Refer to Common FUNC
selection methods.
Selecting "Preset" can restore the value preconfigured for the selected
channel.
Note
If the Encryption Key corresponding to the selected Multi-key is not
0
configured on the SCM, or if the Encryption Key is deleted from the SCM,
"Erased" appears (the AES/ DES encryption only).
When the channels of P25, NXDN and DMR are configured to coexist
0
using the KPG-D1/ D1N, only a Multi-key corresponding to the System
Type (P25, NXDN, or DMR) of the channel on which the transceiver is
waiting appears in the Multi-key List.
3
Press the Menu ([
The Multi-key selected in step 2 is configured for the selected channel.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
DMR FUNC (K, F)/Ver 2.20
Scrambler/ Encryption key.
] key to select Key Data.
"Selecting or Clearing Data from a
]) or [ ] key.
List" for
Transceiver Settings > Key Assignment)
CONTENTS
A
12 : 34
M
Multi Key 01
CKR 01
CKR 02
CKR 03
E xi t Bac k
A
12 : 34
M
Multi Key 04
CKR 02
CKR 03
CKR 04
E xi t Bac k
A
12 : 34
M
Multi Key Pset
CKR 05
CKR 06
Preset
E xi t Bac k
120
INDEX