Kenwood NX-5000 Series Function Reference page 61

1 DMR CONVENTIONAL SYSTEM
1.10 Sending and Receiving a Status Message (Status Call)
0
If the status is not configured for Status List or the Status Name is not
configured, a status No. appears.
If any Emergency status or Horn Alert status (Mobile only) is configured by using KPG-D1/ D1N, the display appears
as below when each status is received:
Reception of Emergency Status
Reception of Man-down Status
Reception of Lone Worker Status
Reception of Stationary Status
Reception of Motion Status
Reception of Horn Alert Status (Mobile only)
Note
If the transceiver receives a Status Message by a Group Call, the ID Name appears according to the configuration for
0
Unit ID Display on Group Call. (Refer to
Call).)
If the received status number is configured in the Status List, an Alert Tone sounds from the transceiver according to the
0
configuration of the corresponding Status List. However, if "Common" is configured in Alert Tone of the Status List, or if
the received status number is not configured in the Status List, an Alert Tone sounds from the transceiver according to
the configuration in Alert Tone (Status/Short Message Call) used in common in a DMR Conventional system. Pressing
any key on the transceiver stops the Alert Tone.
Configuration using KPG-D1/ D1N
0
Configuring Alert Tone (Status List) (
0
Configuring Alert Tone (Status/Short Message Call) used in common in a DMR Conventional system (
Transceiver Settings > DMR > DMR Information > Conventional > Alert Tone)
0
Configuring the contents that appear on the display when various types of status are received (
Settings > Personal > Personal Features > DMR Conventional > Emergency > Emergency ID (DMR Conventional))
0
Configuring Horn Alert Status (
About the Behavior When a Message Requesting the Status Transmission Is
Received
The transceiver sends the status configured for Default Status if a status has never been selected, such as when the
transceiver is turned on.
Configuration using KPG-D1/ D1N
Configuring Default Status (
DMR FUNC (K, F)/Ver 2.20
Table 1-11 Status reception
Status
Display When the Transceiver Receives a Group Call (Unit ID Display on Group
Transceiver Settings > DMR > Status List)
Transceiver Settings > DMR > DMR Information > Status > Option)
Transceiver Settings > DMR > DMR Information > Conventional > Option)
Atlanta Office
Status
Zon e+
Display
Emergency
Man Down
Emg Lone-Work
Emg Stationary
Emg Motion
Horn Alert
Transceiver
CONTENTS INDEX
A
12 : 34
M
50
44