Kenwood NX-5000 Series Function Reference page 41

1 DMR CONVENTIONAL SYSTEM
1.5 Making an Individual Call
Sending the Received Unit ID from the Communication Port (Unit ID Serial Output)
Unit ID Serial Output is the function for sending the received Unit ID from the communication port of the transceiver.
By using Unit ID Serial Output, the dispatcher can monitor the transceiver that is engaged in a voice call in real time. Unit
ID that is sent from the communication port can also be used for managing the call log.
Note
The transceiver will send the Unit ID from the communication port only when Color Code and Slot Selection match the
0
Color Code and Slot Selection configured in the transceiver.
When the transceiver receives a call via Selective Call, Unit ID is sent from the communication port regardless of the
0
configuration of Unit ID Serial Output.
To use Unit ID Serial Output, the "Data" or "Data + GPS Data Output" must be assigned to the communication port of
0
the transceiver.
Configuration using KPG-D1/ D1N
0
Configuring Unit ID Serial Output (
0
Assigning functions to COM port (
Interface > COM Port)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > DMR > DMR Information > General > Serial Output)
Transceiver Settings > Optional Features > Optional Features 1 > Serial
CONTENTS INDEX
24