Kenwood NX-5000 Series Function Reference page 114

2 COMMUNICATIONS IN AN EMERGENCY
2.2 Configuration Related to Transmission and Reception in Emergency Mode
2.2 Configuration Related to Transmission and Reception in
Emergency Mode
The transceiver can have a maximum of 8 configurations related to transmission and reception in Emergency Mode as the
Emergency Profile. By allocating Emergency Profile to each zone or channel, the Emergency behavior of the transceiver
can vary depending on the zone or channel.
The functions that can be configured as an Emergency Profile are as follows:
Emergency Channel Type
0
Emergency Zone-Channel
0
Emergency Mode Type
0
Emergency Cycle
0
Duration of Locator Tone 1
0
Transmit Duration
0
Duration of Locator Tone 2
0
Receive Duration
0
Emergency LED
0
The common functions in Emergency Mode are as follows. One configuration from below is available for the transceiver:
Emergency Display
0
Emergency Microphone Sense
0
Emergency Text
0
Background Transmission
0
Emergency Channel Lock
0
Suspended Power-off
0
Surveillance Mode
0
Functions related to Lone Worker
0
Functions related to Activity Detection
0
Emergency Profile can be configured for each zone or channel. If "Common" is configured in Emergency Profile for a
channel, the transceiver executes the Emergency behavior by using Emergency Profile Number configured for the zone
of the channel.
Also, in a DMR Conventional system, Emergency ID (DMR Conventional) can be configured for each system. (Refer to
Sent When Emergency Mode is
Configuration using KPG-D1/ D1N
0
Configuring the various functions of Emergency Profile (
Emergency Profile)
0
Configuring Common Functions for Emergency Mode (
DMR FUNC (K, F)/Ver 2.20
Activated.)
Transceiver Settings > Emergency Information >
Transceiver Settings > Emergency Information)
CONTENTS
ID
97
INDEX