Kenwood NX-5000 Series Function Reference page 115

2 COMMUNICATIONS IN AN EMERGENCY
2.3 Zone-channel Functioning in Emergency Mode
2.3 Zone-channel Functioning in Emergency Mode
The channel to be used when the transceiver enters Emergency Mode can be configured.
Emergency Channel Type
Emergency Channel Type is the type of a channel used when the transceiver is placed in Emergency Mode.
Configuration
When the transceiver enters Emergency Mode, the transceiver resets the migration state of
Selected channels, such as Home Channel, and then the transceiver executes Emergency on the previously
selected channel.
After entering Emergency Mode, the transceiver migrates to the Zone-channel configured in
Fixed
Emergency Zone-Channel and then executes the Emergency behavior.
The transceiver behaves as below according to the configuration for Emergency Channel Type:
0
Selected
If a channel in a DMR Conventional system is selected:
0
The transceiver behaves according to the configurations of Emergency ID and Emergency DMR ID Type (DMR
Conventional).
Configuration
None The transceiver transmits only using the Color Code.
If "Group ID" is configured for Emergency DMR ID Type, the transceiver initiates a Group Call by
using the Group ID configured for Emergency DMR ID.
DMR
If "Unit ID" is configured for Emergency DMR ID Type, the transceiver initiates an Individual Call
by using the Unit ID configured for Emergency DMR ID.
0
Fixed
If a channel in a DMR Conventional system is configured for Emergency Zone-Channel:
0
The transceiver behaves according to the configurations of Emergency ID and Emergency DMR ID Type (DMR
Conventional).
Configuration
None The transceiver transmits only using the Color Code.
If "Group ID" is configured for Emergency DMR ID Type, the transceiver initiates a Group Call by
using the Group ID configured for Emergency DMR ID.
DMR
If "Unit ID" is configured for Emergency DMR ID Type, the transceiver initiates an Individual Call
by using the Unit ID configured for Emergency DMR ID.
Configuration using KPG-D1/ D1N
0
Configuring Emergency Channel Type (
0
Configuring Emergency ID (DMR Conventional) (
Conventional > Emergency > Emergency ID (DMR Conventional))
DMR FUNC (K, F)/Ver 2.20
Table 2-2 Emergency Channel Type
Table 2-3 Emergency ID (DMR Conventional)
Table 2-4 Emergency ID (DMR Conventional)
Transceiver Settings > Emergency > Emergency Profile)
Transceiver Settings > Personal > Personal Features > DMR
Description
Description
Description
CONTENTS
98
INDEX