Kenwood NX-5000 Series Function Reference page 109

1 DMR CONVENTIONAL SYSTEM
1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)
Off-hook Site Roaming
Supported Models: Mobile
Off-hook Site Roaming is the function to start Site Roaming depending on the status of microphone, either on-hook or off-
hook.
The transceiver behaves as follows according to the configuration in Off-hook Site Roaming.
Configuration
The transceiver can start Site Roaming while the microphone is in either the on-hook state or off-hook
state.
Enabled
Even if the microphone changes from the on-hook state to off-hook state during Site Roaming, Site
Roaming does not pause.
The transceiver can start Site Roaming if the microphone is in the on-hook state. The transceiver cannot
start Site Roaming if the microphone is in the off-hook state. If the microphone changes from the on-
hook state to off-hook state during Site Roaming, Site Roaming pauses on the Revert Channel.
Disabled
Even if the microphone changes from the on-hook state to off-hook state while Site Roaming pauses,
the channel does not change. When the microphone goes to on-hook state, the transceiver resumes
Site Roaming.
Configuration using KPG-D1/ D1N
Configuring Off-hook Site Roaming (
DMR FUNC (K, F)/Ver 2.20
Table 1-24 Off-hook Site Roaming
Description
Transceiver Settings > Scan > Scan Information > DMR Site Roaming)
CONTENTS INDEX
92