Kenwood NX-5000 Series Function Reference page 173

4 SCAN
4.7 Scan Function
Configuration using KPG-D1/ D1N
0
Configuring Auto Scan (Personality > DMR Conventional) to be enabled or disabled (
Personal > Personality > DMR Conventional > General)
0
Configuring Auto Scan (Channel Edit > DMR Conventional) to be enabled or disabled (
Zone/Channel > Channel Edit > DMR Conventional > General)
Selected Channel Scan
Selected Channel Scan is the function to add the selected channel to the target channels for scan even if the channel is
excluded from the target.
Configuration using KPG-D1/ D1N
Configuring Selected Channel Scan to be enabled or disabled (
> General)
Power-on Scan
Power-on Scan is the function to start the scan automatically when the transceiver is turned on.
Portable
If "Zone Select" is configured in Selector or for the Lever switch, the transceiver starts the scan according to the configuration
in Scan Type for the zone number indicated by the pointer of Selector or the Lever switch when the transceiver is turned
on. If the zone number indicated by the pointer of the Selector or the Lever switch is not configured for the transceiver, the
scan does not start.
If anything other than "Zone Select" is configured in Selector or for the Lever switch, the transceiver starts the scan according
to the configuration in Scan Type for the zone selected when the transceiver is turned on.
Mobile
The transceiver starts the scan according to the configuration in Scan Type for the zone selected when the transceiver is
turned on.
Configuration using KPG-D1/ D1N
Configuring Power-on Scan to be enabled or disabled (
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Scan > Scan Information
Transceiver Settings > Scan > Scan Information > General)
CONTENTS
Transceiver Settings >
Transceiver Settings >
156
INDEX