Kenwood NX-5000 Series Function Reference page 162

4 SCAN
4.5 Scanning the Specific Channel Preferentially (Priority Scan)
0
If the Zone-channel configured for the Priority 2 is selected, or if the scan is paused on the Zone-
channel configured for the Priority 2
The " " icon appears. When Priority Scan is paused, the "
0
If the same Zone-channel is selected for Priority 1 and the Priority 2, or if the scan is paused on the
same Zone-channel configured for Priority 1 and the Priority 2
The " " icon with higher priority appears. When Priority Scan is paused, the "
Note
If Priority-channel Stop Tone is enabled, a Priority-channel Tone (1 beep) is emitted from the transceiver when the scan is
0
paused on the Priority Channel and the speaker is unmuted.
The Priority Channel is scanned even if the Priority Channel is excluded from the target channels for scan. However, the Priority
0
Channel can be temporarily excluded from the target channels for scan by using the Priority Temporary Delete/Add function.
If the same channel is selected for Priority 1 and Priority 2, and if Priority Temporary Delete/Add of either Priority 1 or Priority
0
2 is permitted, Priority Temporary Delete/Add is executed only on the permitted Priority Channel when the Scan
Delete/Add key is pressed.
Pressing the Home Channel key during the scan does not change the Priority Channel even if "Selected Priority Scan" is
0
configured for the Priority.
The transceiver behaves as follows if one of the Direct Channel 1 to Direct Channel 5 keys is pressed during the scan:
0
If Return is disabled, Direct Channel 1 to Direct Channel 5 become the Priority Channels if Direct Channel 1 to Direct Channel
0
5 are Conventional channels.
If Return is enabled, the Priority Channel does not change.
0
Configuration using KPG-D1/ D1N
0
Configuring Priority 1 (Single Scan) (
0
Configuring Priority 2 (Single Scan) (
0
Configuring Priority 1 (List Scan) (
0
Configuring Priority 2 (List Scan) (
0
Configuring Priority-channel Stop Tone to be enabled or disabled (
> General)
DMR FUNC (K, F)/Ver 2.20
" icon blinks.
12 : 34
Z o n e 1
C h a n n e l 1
Me nu Z on e+
12 : 34
Z o n e 1
C h a n n e l 1
Me nu Z on e+
Transceiver Settings > Zone/Channel > Zone Edit > Single Scan > Priority 1)
Transceiver Settings > Zone/Channel > Zone Edit > Single Scan > Priority 2)
Transceiver Settings > Scan > Scan List > Options > Priority 1)
Transceiver Settings > Scan > Scan List > Options > Priority 2)
A
M
" icon blinks.
A
M
Transceiver Settings > Scan > Scan Information
CONTENTS
145
INDEX