Kenwood NX-5000 Series Function Reference page 177

6
6 KEY OPERATIONS FOR EACH MODE
KEY OPERATIONS FOR EACH MODE
Key operations for selecting a list or entering characters are described for each mode in this chapter. Refer to Common
FUNC "Operating the Transceiver in Each Mode (Common
Key
Press
Menu ([Q])
Press
Back ([O])
Hold
Down
Press
Function ([W])
Press
Home ([T])
*1 *2 Press
Side 1 or [+]
*1 *2 Press
Side 2 or [-]
*1 Press
Side 3
Press
[G]/ [H]
Hold
Down
*2
[E] or [ ]
Press
*2
[F] or [ ] Press
*3
-
Selector
*1
-
Lever Switch
[0] to [9] Press
[*] Press
Press
[#]
Hold
Down
PTT Switch Press
Portable only
*1
*2 KCH-20R (Featured Panel) only
*3 Portable and KCH-20R (Featured Panel) only
DMR FUNC (K, F)/Ver 2.20
Selecting a list
Individual
TRUCK 824
TRUCK 825
TRUCK 826
P ag e
Initiates a Paging Call after aborting the
current mode.
Returns to the menu (if the transceiver enters
this mode by pressing the Menu key).
-
Migrates to the code entry mode (only if
Manual Dialing is enabled).
Selects Unit IDs registered in the Individual ID
List one at a time.
Selects Unit IDs registered in the Individual ID
List continuously.
Migrates to Status Mode or Short Message Mode.
The configured function functions after aborting the current mode.
The configured function functions after aborting the current mode.
Directly selects a Unit ID registered in the list. Enters the Digit No.
Initiates a Paging Call after aborting the
current mode.
Returns to the menu (if the transceiver enters
this mode by pressing the Menu key).
-
Transmits after aborting the current mode.
Operation)" for instruction.
Individual Call Mode
Manual entry
A
12 : 34
M
0002
B a c k
Initiates a Paging Call after aborting the
current mode (after finalizing the Digit No.).
Finalizes the Digit No. (While the Digit No. is
flashing)
Deletes one character.
Returns to the menu if no character is entered
(if the transceiver enters this mode by
pressing the Menu key).
Deletes all characters.
Migrates to the list selection mode.
Aborts the current mode.
The configured function functions.
The configured function functions.
The configured function functions.
Selects Digit No. one at a time.
Selects Digit No. continuously.
-
Initiates a Paging Call after aborting the
current mode (after finalizing the Digit No.).
Finalizes the Digit No. (While the Digit No. is
flashing)
Deletes one character.
Returns to the menu if no character is entered
(if the transceiver enters this mode by
pressing the Menu key).
Deletes all characters.
CONTENTS
A
12 : 34
M
Individual
UID 1
S el ec t Del et e
INDEX
160