Kenwood NX-5000 Series Function Reference page 116

2 COMMUNICATIONS IN AN EMERGENCY
2.3 Zone-channel Functioning in Emergency Mode
Emergency Zone-Channel
Emergency Zone-Channel is the Zone-channel used in Emergency Mode if "Fixed" is configured in Emergency Channel
Type.
Configuration using KPG-D1/ D1N
Configuring Emergency Zone-Channel (
2.4 Automatically Transmitting and Receiving in Emergency Mode
The number of times for which the transceiver toggles between transmission and reception, or the duration for a single
session of automatic transmission or reception for emergency in Emergency Mode can be configured. Also, the microphone
sensitivity can be changed and the Background Tone (1 beep) can be multiplexed on the audio to be transmitted in
Emergency Mode.
Emergency Cycle
Emergency Cycle is the number of times that the transceiver toggles between transmission and reception for an emergency
in Emergency Mode.
Configuration
The transceiver repeats automatic transmission and automatic reception for the configured
1 to 200
number of times, and then the transceiver exits Emergency Mode.
The transceiver continues to alternate between automatic transmission and reception until the
Infinite
Emergency key is pressed again or the transceiver is turned off.
Off The transceiver does not automatically transmit and receive in Emergency Mode.
Configuration using KPG-D1/ D1N
Configuring Emergency Cycle (
Duration of Locator Tone 1
Duration of Locator Tone 1 is the duration to emit an Alert Tone which notifies that the transceiver will start transmission
before the transceiver starts automatic transmission in Emergency Mode.
The transceiver automatically repeat transmitting and receiving in Emergency Mode. When the transceiver switches from
reception to transmission, an Emergency Locator Tone (2 beeps) sounds from the transceiver for the length of the time
configured for Duration of Locator Tone 1.
When the tone sounds, a user can easily recognize without viewing the transceiver that the transceiver is about to
automatically transmit in Emergency Mode. This tone can also be used to locate a user who is in emergency situations.
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Emergency > Emergency Profile)
Table 2-5 Emergency Cycle
Description
Transceiver Settings > Emergency Information > Emergency Profile)
CONTENTS INDEX
99