Kenwood NX-5000 Series Function Reference page 117

2 COMMUNICATIONS IN AN EMERGENCY
2.4 Automatically Transmitting and Receiving in Emergency Mode
Note
This function is enabled if "Audible" is configured for Emergency Mode Type.
0
For a portable transceiver that is connected to a Bluetooth or external speaker, Emergency Locator Tone (2 beeps) is
0
emitted from the speaker of the transceiver regardless of the configuration of Bluetooth Speaker and External
Speaker. Also, the audio received will be output according to the configuration of the Bluetooth Speaker and External
Speaker.
For Mobile, where an Emergency Locator Tone (2 beeps) and received audio are emitted from depends on the
0
configuration in External Speaker.
Refer to Common FUNC
0
Tone (2 beeps) if a speaker supporting Bluetooth is connected.
Configuration using KPG-D1/ D1N
Configuring Duration of Locator Tone 1 (
Duration of Locator Tone 2
Duration of Locator Tone 2 is the duration to emit an Alert Tone which notifies that the transceiver has completed an
automatic transmission in Emergency Mode, and starts receiving.
The transceiver automatically repeat transmitting and receiving in Emergency Mode. When the transceiver switches from
reception to transmission, an Emergency Locator Tone (2 beeps) sounds from the transceiver for the length of time
configured for Duration of Locator Tone 2.
When the tone sounds, a user can easily recognize without viewing the transceiver that the transceiver ends to automatically
transmit in Emergency Mode. This tone can also be used to locate a user who is in emergency situations.
Note
This function is enabled if "Audible" is configured for Emergency Mode Type.
0
For a portable transceiver that is connected to a Bluetooth or external speaker, Emergency Locator Tone (2 beeps) is
0
emitted from the speaker of the transceiver regardless of the configuration of Bluetooth Speaker and External
Speaker. Also, the audio received will be output according to the configuration of the Bluetooth Speaker and External
Speaker.
For Mobile, where an Emergency Locator Tone (2 beeps) and received audio are emitted from depends on the
0
configuration in External Speaker.
Refer to Common FUNC
0
Tone (2 beeps) if a speaker supporting Bluetooth is connected.
Configuration using KPG-D1/ D1N
Configuring Duration of Locator Tone 2 (
DMR FUNC (K, F)/Ver 2.20
"Switching the Speaker to Emit Audio (Bluetooth
Transceiver Settings > Emergency Information > Emergency Profile)
"Switching the Speaker to Emit Audio (Bluetooth
Transceiver Settings > Emergency Information > Emergency Profile)
Speaker)" for the speaker to emit the Locator
Speaker)" for the speaker to emit the Locator
CONTENTS INDEX
100