Kenwood NX-5000 Series Function Reference page 106

1 DMR CONVENTIONAL SYSTEM
1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)
Note
The behavior of Manual Site Hunt is independent of the configuration of Active Site Hunt. Also, it runs even when the
0
transceiver is already synchronized with a repeater.
Manual Site Hunt runs only when a channel of the DMR Conventional system that is configured as "DMR Site Roaming"
0
is selected.
Manual Site Hunt does not function while the transceiver is in Emergency Mode.
0
"Search" appears on the display while the transceiver is searching for a synchronizable repeater.
0
Pressing the Clear key while the transceiver is searching for a synchronizable repeater ends Manual Site Hunt.
0
The transceiver determines whether to migrate to the Revert Channel based on the RSSI level set by Standard Site
0
Roaming Level. The transceiver does not determine it based on the RSSI level set by Quick Site Roaming Level.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Site Roaming LED
Supported Models: Portable
Site Roaming LED is the function that sends a visual notification to inform the user that the transceiver is executing Site
Roaming.
The LED can be configured to flash in one of the 7 colors below when the transceiver starts Site Roaming.
0
Yellow
0
Purple
0 Blue
0
Light Blue
0
Red
0
Green
0 White
Configuration using KPG-D1/ D1N
Configuring Site Roaming LED to be enabled or disabled (
Site Roaming)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Key Assignment)
Transceiver Settings > Scan > Scan Information > DMR
CONTENTS
89
INDEX