Kenwood NX-5000 Series Function Reference page 76

1 DMR CONVENTIONAL SYSTEM
1.13 Calling All Transceivers Having the Same Color Code (Unaddressed Call)
1.13 Calling All Transceivers Having the Same Color Code
(Unaddressed Call)
Unaddressed Call is the function to initiate 2-way voice communication with multiple transceivers without specifying a group.
In a regular Group Call, the transceiver can communicate only with transceivers included in the Group ID specified.
Unaddressed Call can initiate a call to all transceivers having the same Color Code on the same channel.
Using this function, such as during an emergency, the transceiver can initiate a call without distinguishing the group to share
information with the users of multiple groups.
To use this function, "Off" needs to be configured in Selcall on PTT of the channel to be used for an Unaddressed Call by
using KPG-D1/ D1N.
Note
The transceiver can send the ID of the transmitting transceiver from the communication port on the transceiver when
0
receiving an Unaddressed Call. (Refer to
Output).)
An Unaddressed Call can also be initiated by receiving a PC command from the communication port. To use a PC
0
command, "Data" or "Data + GPS Data Output" needs to be assigned to the communication port of the transceiver. (Refer
to Common FUNC Available Functions for COM
Configuration using KPG-D1/ D1N
0
Configuring Color Code (Personality) (
DMR)
0
Configuring Color Code (Channel Edit) (
Conventional > DMR)
0
Configuring Selcall on PTT (Personality) (
> DMR > Selcall on PTT)
0
Configuring Selcall on PTT (Channel Edit) (
Conventional > DMR > Selcall on PTT)
DMR FUNC (K, F)/Ver 2.20
Sending the Received Unit ID from the Communication Port (Unit ID Serial
Port.)
Transceiver Settings > Personal > Personality > DMR Conventional >
Transceiver Settings > Zone/Channel > Channel Edit > DMR
Transceiver Settings > Personal > Personality > DMR Conventional
Transceiver Settings > Zone/Channel > Channel Edit > DMR
CONTENTS INDEX
59