Kenwood NX-5000 Series Function Reference page 67

1 DMR CONVENTIONAL SYSTEM
1.10 Sending and Receiving a Status Message (Status Call)
Storing the Selected or Sent Status (Status Hold)
Status Hold is the function to store in the transceiver the status selected from the Status List in Status Mode and the
transmitted status.
When the transceiver receives a status request message, the status stored in the transceiver will automatically be
transmitted. Also, the status stored in the transceiver will automatically be stored in GPS data and transmitted.
Configuration
Selected The transceiver stores the status selected from the Status List in Status Mode.
The transceiver stores a status selected from the Status List in Status Mode and a status
transmitted by one of the following method.
0
Selected + Transmit
0
0
0
0
Configuration using KPG-D1/ D1N
Configuring Status Hold (
1.11 Sending and Receiving a Short Message (Short Data Call)
Short Data Call is the message communication function to send and receive a text string. Information which is difficult to
send by voice, such as an address or a telephone number, can be reliably sent.
The number of characters that can be sent and received is as follows:
0
The number of characters that can be sent
During communication via Group Call excluding Individual Call: up to 365 characters
During communication via Individual Call: up to 489 characters
0
The number of characters that can be received
During communication via Group Call excluding Individual Call: up to 369 characters
During communication via Individual Call: up to 493 characters
DMR FUNC (K, F)/Ver 2.20
Table 1-14 Status Hold
The status transmitted when one of the AUX Input Status Message 1 to AUX Input Status
Message 3 ports change (Mobile only)
The status transmitted when the transceiver is turned on (Power-on Status)
The status transmitted by pressing any of the PF keys having "Call 1" to "Call 6" allocated
The status transmitted when any of the AUX Input ports having "Call 1" to "Call 6" allocated
becomes active (Mobile only)
The status transmitted by using a PC command
Transceiver Settings > DMR > DMR Information > General)
Description
CONTENTS
50
INDEX