Kenwood NX-5000 Series Function Reference page 89

1 DMR CONVENTIONAL SYSTEM
1.16 GPS Functions
GPS Report Back to Requested ID
GPS Report Back to Requested ID is the function that enables the receiving transceiver to send the GPS data to the ID
of the transceiver, which sends a GPS Polling Request, upon receipt of the following GPS Polling Requests:
GPS Data Single Polling Request
0
GPS Data Multiple Polling Request
0
When the above-mentioned GPS Polling Request is received, the GPS data is sent to the ID of the transceiver which sends
the GPS Polling Request, if this function is enabled.
If this function is disabled, the GPS data is sent to the ID configured with GPS Base ID or Base ID even when the above-
mentioned GPS Polling Request is received.
Configuration using KPG-D1/ D1N
Configuring GPS Report Back to Requested ID to be enabled or disabled (
Personal Features > DMR Conventional > GPS)
GPS Data Storage
GPS Data Storage is the function that allows GPS data to be saved in both the internal memory and microSDHC card.
The transceiver stores the GPS data at the intervals configured for GPS Storage Interval . The stored GPS data can be
sent from the transceiver or can be read using a PC. (Refer to Common FUNC
Storage).)
Acquired GPS data is temporarily saved in the RAM in the transceiver. When the number of saved data items reaches 3,
the GPS data is written on both the internal memory and microSDHC card. If the transceiver is turned off when the number
of GPS data items temporarily saved in the RAM in the transceiver is 1 or 2, the GPS data is erased without being written
on the internal memory and microSDHC card.
The internal memory allows a maximum of 3,500 GPS data items to be written.
The microSDHC card allows GPS data acquired for up to 250 days or GPS data which do not exceed the capacity of the
card to be written.
Note
GPS data is written in the output format configured in GPS Data Record Format. If no output format is configured, GPS
data is not written. (Refer to Common FUNC
Configuration using KPG-D1/ D1N
0
Configuring GPS Data Storage to be enabled or disabled (
Features 2 > microSD/Memory > GPS Data)
0
Configuring GPS Storage Interval to be enabled or disabled (
Optional Features 2 > microSD/Memory > GPS Data)
DMR FUNC (K, F)/Ver 2.20
About microSD Card.)
Transceiver Settings > Optional Features > Optional
Transceiver Settings > Optional Features >
Transceiver Settings > Personal >
Storing the GPS Data (GPS Data
CONTENTS INDEX
72