Kenwood NX-5000 Series Function Reference page 170

4 SCAN
4.7 Scan Function
Revert Channel
Revert Channel is the Zone-channel which is used when the transceiver transmits by pressing the PTT switch during the
scan.
Configuration
The transceiver transmits on the last-called Zone-channel by pressing the PTT switch during the
scan.
The transceiver transmits on the Zone-channel where the transceiver pauses the scan by pressing
Last Called + Selected
the PTT switch during the scan.
If the Zone-channel is changed, the transceiver transmits using the new channel after the Zone-
channel is changed until the transceiver receives another call.
The transceiver transmits on the new channel after the Zone-channel is changed regardless of
Selected
the scan status.
During the scan, the transceiver transmits on the new Zone-channel after the zone-channel is
changed.
Selected + Talkback
While the scan is paused, the transceiver transmits on the Zone-channel where the transceiver
pauses scanning.
Priority 1 The transceiver transmits on a Priority 1 regardless of the scanning status.
The transceiver transmits on a Priority 1 during the scan.
Priority 1 + Talkback
While the scan is paused, the transceiver transmits on the Zone-channel where the transceiver
pauses scanning.
Priority 2 The transceiver transmits on a Priority 2 regardless of the scanning status.
The transceiver transmits on a Priority 2 during the scan.
Priority 2 + Talkback
While the scan is paused, the transceiver transmits on the Zone-channel where the transceiver
pauses scanning.
Note
Revert Channel always appears on the display of the transceiver during the scan.
0
If Home Channel is activated, the transceiver transmits on the Home Channel regardless of the configuration in Revert
0
Channel.
If the Direct Channel function (Return = Check) is activated, the transceiver transmits on the Direct Zone-Channel
0
regardless of the configuration in Revert Channel.
Configuration using KPG-D1/ D1N
0
Configuring Revert Channel (Single Scan) (
0
Configuring Revert Channel (List Scan) (
DMR FUNC (K, F)/Ver 2.20
Table 4-4 Revert Channel
Description
Transceiver Settings > Zone/Channel > Zone Edit > Single Scan)
Transceiver Settings > Scan > Scan List > Options)
CONTENTS INDEX
153