Kenwood NX-5000 Series Function Reference page 125

2 COMMUNICATIONS IN AN EMERGENCY
2.8 Placing the Transceiver in Emergency Mode Using the Lone Worker Function
2.8 Placing the Transceiver in Emergency Mode Using the Lone
Worker Function
Lone Worker is the function that automatically places the transceiver in Emergency Mode if the transceiver is not operated
for a certain period of time.
If the transceiver is placed in Lone Worker Mode while the user has a task at a dangerous place, for instance, the transceiver
automatically enters Emergency Mode and notifies a base station of the emergency status because a user cannot operate
the transceiver due to an accident.
Since the Lone Worker Tone (2 beeps) sounds from the transceiver prior to entering Emergency Mode if the transceiver is
in the Lone Worker Mode, the Lone Worker function can also be used to warn a user.
Enabling the Transceiver in Lone Worker Mode/Disabling Lone Worker Mode
The transceiver enters or exits Lone Worker Mode by a user operating the keys on the transceiver.
Operating the transceiver
0
Placing the transceiver in Lone Worker Mode
1
Do either of the following operations while the transceiver is not in Lone Worker Mode:
0
Press the Lone Worker key.
0
Select a channel where Lone Worker is enabled.
0 Press the Menu key to enter Menu Mode, and select "Lone Worker" and then select "ON".
The " " icon appears, the transceiver enters Lone Worker Mode, and
then Lone Worker Interval is activated. The Key Beep A (1 beep) sounds
from the transceiver when the Lone Worker key is pressed.
If no key is pressed after Lone Worker Interval is activated, the Lone Worker Tone (2 beeps) sounds from the transceiver
when the time configured in Lone Worker Interval elapses. The Lone Worker Tone (2 beeps) sounds for the duration
configured in Duration of Lone Worker Tone. If no key is pressed while the Lone Worker Tone (2 beeps) continues to
sound from the transceiver, and if the time configured in Duration of Lone Worker Tone elapses, the transceiver enters
Emergency Mode.
The transceiver behaves according to the configuration of Emergency after the transceiver enters Emergency Mode.
DMR FUNC (K, F)/Ver 2.20
Z o n e 1
C h a n n e l 1
M en u Zo ne+
CONTENTS INDEX
A
12 : 34
M
108