Kenwood NX-5000 Series Function Reference page 152

4 SCAN
4.2 Scanning in One Zone (Single Scan)
4.2 Scanning in One Zone (Single Scan)
The transceiver scans using Single Scan all the added channels in the zone where the transceiver starts scanning.
If a scan starts in the zone where "Single" is configured in Scan Type, Single Scan is executed. Or, if the transceiver migrates
during the scan to the zone where "Single" is configured in Scan Type, Single Scan is executed.
The target channel for scan is either the channel with Scan Add enabled by using KPG-D1/ D1N or the channel with Scan
Add enabled by using the Scan Delete/Add key.
Operating the transceiver
1
Press the Scan key.
The scan starts after a Key Beep A (1 beep) sounds from the transceiver.
The " " icon appears and then Revert Channel is displayed.
If "Scan" Displayed is enabled, "Scan" is displayed.
For portable transceivers, the LED light flashes according to the
configuration of Non-Priority Scan LED in the case of non-priority scan,
and according to the configuration of Priority Scan LED in the case of
priority scan.
Note
The transceiver behaves in the same manner even if the scan is started
by other method. (Refer to
2
Press the Scan key during the scan.
The scan completes after a Key Beep B (2 beeps) sounds from the
transceiver and the "
Note
Single Scan functions only in the zone consisting of channels of the same system. However, Single Scan functions even
0
when the zone includes Conventional channels of other systems or channels of an LTR Trunking system.
If Selected Channel Scan is enabled, the selected channel can be scanned even if the channel is excluded from the
0
target channels for scan. (Refer to
For Portable, if the transceiver changes the zone during a Single Scan by using Selector with "Zone Select" configured
0
and if the new zone is not configured, the "
If another zone is selected during the Single Scan, the transceiver starts the scan according to the configuration in Scan
0
Type of the selected zone.
DMR FUNC (K, F)/Ver 2.20
Starting the Scan.)
" icon disappears.
Selected Channel Scan.)
" icon blinks and the scan pauses.
Z o n e 1
C h a n n e l 1
S c a n
M en u Zo ne+
Z o n e 1
C h a n n e l 1
M en u Zo ne+
CONTENTS INDEX
A
12 : 34
M
A
12 : 34
M
135