Kenwood NX-5000 Series Function Reference page 45

1 DMR CONVENTIONAL SYSTEM
1.6 Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call Acknowledge Request)
Receiving an Individual Call (Individual Call Acknowledge Request)
The transceiver can receive an Individual Call if the received Unit ID matches the Unit ID (Own) preconfigured for the
transceiver.
To receive an Individual Call (Individual Call Acknowledge Request), the receiving transceiver must receive a message
requesting an acknowledgment from the transmitting transceiver. The transceiver becomes enabled for the communication
after the transmitting transceiver receives an acknowledgment message.
Operating the transceiver
1
Receive a message requesting an acknowledgment.
The " " icon blinks, and the ID Name of the transmitting transceiver
appears.
An acknowledgment message is automatically sent to the transmitting
transceiver.
2
Press the PTT switch after transmission of an acknowledgment.
The transceiver initiates an Individual Call to the transmitting transceiver.
Note
If Busy LED is enabled, the LED lights green when the transceiver is receiving. (Refer to Common FUNC
0
If Alert Tone is configured to sound when receiving, an Alert Tone will sound. (Refer to
0
receiving an Individual Call (Individual Call Acknowledge
If Selective Call Alert LED or Optional Signaling LED is enabled, the LED flashes when the transceiver is receiving.
0
(Refer to Transceiver behavior when receiving an Individual Call (Individual Call Acknowledge
Transceiver behavior when receiving an Individual Call (Individual Call Acknowledge Request)
0
Alert Tone
If the received Unit ID is configured in the Individual ID List, an Alert Tone sounds from the transceiver according to the
configuration for Alert Tone (Individual) of the corresponding Unit ID.
However, if "Common" is configured in Alert Tone (Individual) of the Individual ID List, or if the received Unit ID is not
configured in the Individual ID List, an Alert Tone sounds from the transceiver according to the configuration in Alert
Tone (Individual Call) used in common in a DMR Conventional system.
0
Selective Call Alert LED
If the received Unit ID is configured in the Individual ID List, the LED flashes according to the configuration for Alert LED
Color (Individual) of the corresponding Unit ID.
However, if "Common" is configured in Alert LED Color (Individual) of the Individual ID List, or if the received Unit ID
is not configured in the Individual ID List, the LED flashes according to the configuration in Alert LED Color (Individual
Call) used in common in a DMR Conventional system.
0
Optional Signaling LED
If Optional Signaling LED is enabled, the LED flashes in yellow. However, when Selective Call Alert LED is enabled,
LED will flash in accordance with the configuration of Selective Call Alert LED.
Also, when the transceiver key is operated while the LED flashes according to the Selective Call Alert LED configuration,
the LED flashes in yellow if the matching state of Optional Signaling persists.
DMR FUNC (K, F)/Ver 2.20
Request).)
CONTENTS
12 : 34
I n d i v i d u a l
T R U C K 8 2 4
M en u Zo ne+
Busy LED.)
Transceiver behavior when
Request).)
INDEX
A
M
28