Application "Time Programs; Application "Logical Functions - ABB SmartTouch B/stainless Product Manual

Commissioning of the KNX function via ABB DCA SmartTouch 10 (from
9.10.5

Application "Time programs"

This application has an application page, via which time programs can be set. This allows the
holiday function to be started and set up, for example.
The general settings can be made via the DCA.
1. Open the "Applications" tab in the library area.
2. Open "Time programs".
– The general settings for this application are displayed in the "Parameter" area. They can
be edited here.
Further setting/selection options via the "Parameter" area for the general settings of the time
programs, see chapter 9.10.5 "Application "Time programs"" on page 108.
9.10.6

Application "Logical functions"

This application (function) has not an own application page. The logic functions can be defined
in channels and run in the background.
The channels / logic functions can be created via the DCA.
1. Open the "Applications" tab in the library area.
2. Click on "Logic functions", a page with a plus appears here.
3. Click on this page, and a channel will be added and displayed in the tree structure.
Notice
Individual logic functions can be created in the respective channels. The
channels can be added via the work area.
– You can add more channels via the page with the plus.
– If such a channel is called up via the tree structure, the settings can be
adjusted for the individual logic functions in the "Parameter" area.
– By clicking the arrow next to "Logic functions", all available channels are
displayed in the tree structure.
For further setting/selection options via the "Parameter" area for the settings of the logic
functions, see chapter 9.10.6 "Application "Logical functions"" on page 108.
Product manual 2CKA001473B5343
ETS5)
│108