Table of Contents
Advertisement
Options:
The length of the text is limited to 14 characters.
10.1.7
Status control element (icon/text) is operated via a separate object
Options:
An additional 1-bit communication object "Status" is enabled via the parameter.
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
10.1.8
Icon type
Options:
The parameter is used to set whether an icon or a text is displayed.
–
Icons:
Icons for On:
Options:
The selected icon is displayed when the light is switched on.
Icons for Off:
Options:
The selected icon is displayed when the light is switched off.
–
Text:
Text for On:
Options:
The entered text is displayed when the light is switched on.
Text for Off:
Options:
The entered text is displayed when the light is switched off.
10.1.9
Enable 1-bit communication object "Disable"
Options:
There is the option of temporarily disabling the function via an additional communication object
"Disable".
Product manual 2CKA001473B5343
KNX control elements and application parameters
<Text>
No
Yes
Icons
Text
<Selection of an icon from the list>
<Selection of an icon from the list>
<Text>
<Text>
No
Yes
"Switch" control element
│120
Hide quick links:
Advertisement
Table of Contents
