Table of Contents
Advertisement
operation.
10.11.8 Status control element (icon) is controlled by a separate object
Options:
An additional 1-bit communication object "Status" is enabled via the parameter.
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
10.11.9 Number of scenes [1 - 10]
Options:
The parameter is used to specify the number of scenes available in the selection list.
10.11.10 Scene number x [1 - 64]
Options:
The parameter is used to specify which scenes are to be started.
Notice
How many "Scene number x [1 - 64]" parameters are available depends on
the setting of the "Number of scenes [1 - 10]" parameter.
10.11.11 Name of scene x
Options:
Designation of scene. The length of the name is limited to 60 characters.
Notice
How many "Name of scene x" parameters are available depends on the
setting of the "Number of scenes [1 - 10]" parameter.
10.11.12 Background for scene x
Notice
Whether a picture or an icon can be selected is dependent on the setting of the
"Scene background" parameter.
Product manual 2CKA001473B5343
KNX control elements and application parameters
Deactivated
Activated
Setting option from 1 - 10
Setting option from 1 - 64
<Name>
"Scene" control element
│164
Hide quick links:
Advertisement
Table of Contents
