ABB SmartTouch B/stainless Product Manual page 85

Commissioning of the KNX function via ABB DCA SmartTouch 10 (from
Proximity sensor
Use approximation for switching on the display
■
Options:
When the checkbox is activated, a proximity is used as switch-on criteria for the display.
Sensitivity of the proximity function
■
Options:
The parameter us used to specify the sensitivity of the proximity function (1 = near, 3 = max.
distance).
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" is activated.
Use 1-bit output object of proximity function
■
Options:
When the checkbox is activated, a 1-bit output object of the proximity function is used.
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" is activated.
Switch-on value
■
Options:
The parameter is used to set the switch-on value of the proximity sensor.
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" and the "Use 1-bit output object of proximity function" are activated.
Product manual 2CKA001473B5343
Activated
Deactivated
1
2
3
Activated
Deactivated
Off
On
ETS5)
│85