ABB SmartTouch B/stainless Product Manual page 213

– RGBW colour: A colour value is sent as hexadecimal value.
Value for object x:
Options:
The entered colour value (red, green, white) is displayed as colour pattern next to the
parameter.
– Colour temperature: The colour temperature is sent in Kelvin (K). The following
supplementary parameter is available:
Value for object x:
Options:
– 8-bit scene: A light scene number is sent with 8 bits. The following supplementary
parameter is available:
Value for object x:
Options:
– RTC operating mode: The RTC operating mode is sent via the communication object. The
following supplementary parameter is available:
Value for object x:
Options:
– Temperature: After the control element is actuated, the device sends the parameterized
temperature value. The following supplementary parameter is available:
Value for object x:
Options:
– 14-byte text: Makes it possible to send any text with a maximum of 15 characters. The
following supplementary parameter is available:
Value for object x:
Options:
Notice
How many "Object type x" parameters are displayed depends on the setting of
the "Number of participants" parameter.
Notice
Parameter "Value for object x" can only be set for all options if parameter
"Object x is to be changed" is set on "Yes".
Product manual 2CKA001473B5343
KNX control elements and application parameters
Setting option from #00000000 - #FFFFFFFF
Setting option from 1500 - 10000
Setting option from 1 - 64
Comfort
Auto
Standby
ECO
Frost/heat protection
Setting option from 16 - 31
<Text>
Application "Scene actuator"
│213